At last an alternative to the rather inelegant Radiator Cover to be found in every DIY store!
Our Radiator Table still allows the radiator to do what it was designed for whilst at the same time significantly reducing its visual impact. The table has an MDF top to reduce the possibility of shrinkage cracks caused by the heat and two simple self assembly legs. Simply fix to the wall by screwing through the rear rail or use mirror plates. As the table effectively ‘hooks’ over the radiator you may even find that you do not need to fix the table at all as the radiator will prevent the table from tipping forward (just check that there is at least 18mm gap between wall and the radiator).
The rest of the Table is made from solid mango wood which can be left natural or you can paint it at the same time as you paint your panelling. Just use a wood primer first and then we would recommend an eggshell paint.
Legs can be cut on site to suit height requirements. The front and side aprons of the table are about 13cms high including the top.
Please note the Tables are only available in the natural wood with an MDF top however we have shown examples where they have been painted.
As a general rule for a standard single or double pressed steel radiator the depth needs to be at least 12cm more than the face of the radiator, 25cm wider and 5cm higher. This will give the overall maximum size of the table including the overhang of the top. We have included an image of the underside of these tables to assist with working out sizes.
**If ordered with panelling this item may arrive separately and can take up to 3 weeks for delivery**